Heliport products

Heliport Control System is a control system for controlling all types of lighting at a heliport. Each group of TLOF/FATO lights can be controlled and dimmed separately with individual switches.

Heliport Beacon is a light beacon adapted for landing sites for helicopters. The Heliport Beacon is a robust light but with a relatively low weight of 19 kg. The beacon emits repeated series of short white flashes at regular intervals corresponding to the letter ”H” in Morse code. Also available in a variant that emits […]

HAPI LIGHT-LED enables the pilot to determine the angle of approach and aids in day and night landings in average conditions without the need for any other instruments. It is built with a tempered front glass to protect against stones and others flying particles. It includes an integrated deflection plate of the upper leading edge […]

There must be wind direction indicators for the flight crew to be able to get wind information during approach and take-off. If the heliport is to be used after dark there should be at least one wind direction indicator illuminated. The mast of the wind direction indicator is made of aluminum alloy and the fabric […]

Heliport Floodlight is a unidirectional spotlight for helicopter landing sites that facilitate landing and loading in a way that does not dazzle pilots. Heliport Floodlight has a lifespan of 60,000 hours and a height of 250 mm. Obstacles on a heliport intended to be used during darkness should be illuminated with floodlights if the obstacle […]

Inset Heliport FATO Light is a light intended for heliports. The light has a 6,35mm protrusion above ground and is equipped with a pressure valve for water tightness testing. The light is omnidirectional and emits a green, steady light. The lights on FATO and TLOF must be inset if they can pose a danger to […]

Elevated Heliport FATO Light is a light designed for heliports with the purpose of marking the platform’s touchdown and lift-off area. The light is green, omnidirectional and has a height of 250 mm. Elevated Heliport FATO Light is ICAO certified and meets the requirements for international standards and recommendations as well as general advice for […]

Inset Heliport FATO Light is a light intended for heliports. The light has a 6,35 mm protrusion above to ground and is equipped with a pressure valve for water tightness testing. The lights on FATO and TLOF must be inset if they can pose a danger to helicopter traffic. Elevated Heliport FATO Light is ICAO […]

Elevated Heliport FATO Light is an elevated light designed for heliports with the purpose of marking the platform’s take-off and landing area. The light is white, omnidirectional and has a height of 250 mm. Elevated Heliport FATO Light is ICAO certified and meets the requirements for international standards and recommendations as well as general advice […]